Top seller
No results were found for the filter!
with 2 balls (10mm), practical for home winemaking because unbreakable; use for smaller containers (5-20l). Fill the fermentation tube halfway with water and close the fermentation vessel with a rubber stopper to prevent air from...
Order number: 020004 €2.90 *

Suitable for fermentation tanks up to approx. 30 l. Suitable for corks and rubber stoppers with 10mm hole drilling (click on the correct selection!) . The cup part is filled approx. up to half the height with pure water (up to marking)...
Order number: 020105 €4.90 *
For drums from approx. 60 l Slightly conical neck, suitable for 16-18 mm opening in the bung (cork or rubber stopper). Suitable for corks and rubber stoppers with 17mm hole (click on the...
Order number: 020006 €5.80 *
36/44 (40 mm high) for beverage kegs without bore. Fits all our Speidel fermenters to be able to use fermentation tube, or fermentation bung.
Order number: 110006 €3.20 *
with 10mm bore, H = 50, oDiam. = 60, uDiam. 50
Order number: 110303 €6.60 *
with 17mm bore, H = 50, oDiam. = 60, uDiam. 50
Order number: 110403 €6.60 *
with 10mm bore, H = 40, oDiam. = 54, uDiam. 46
Order number: 110304 €5.10 *
with 17mm bore, H = 40, oDiam. = 54, uDiam. 46
Order number: 110404 €5.10 *
with 10mm bore, H = 35, oDiam. = 49, uDiam. 42
Order number: 110305 €4.20 *
with 17mm bore, H = 35, oDiam. = 49, uDiam. 42
Order number: 110405 €4.20 *
36/44 (40 mm high) for beverage kegs with 10mm diameter hole. Fits all our Speidel fermenters to be able to use fermentation tube, or fermentation bung .
Order number: 110306 €3.80 *
36/44 (40 mm high) for beverage barrels with 17mm diameter hole. Fits all our Speidel fermenters to be able to use fermentation tube, or fermentation bung .
Order number: 110406 €3.80 *
Viewed